Sacco
New Member
Posts: 17
Posts: 17
|
Post by Sacco on Nov 1, 2018 3:02:02 GMT 1
Thank you I'm glad you enjoy them.
|
|
Sacco
New Member
Posts: 17
Posts: 17
|
Post by Sacco on Jan 4, 2017 13:19:44 GMT 1
Ah damn! sorry for the super late reply. Got no notification. I wanted to do new skins cause they are getting too small on today's monitors. Well, old news as I already did. I didn't know OhmBoyz had an explode button.
|
|
Sacco
New Member
Posts: 17
Posts: 17
|
Post by Sacco on Dec 28, 2016 22:08:43 GMT 1
Hi. thanks for the reply. I need this for a multi button stack. I could implement it successfully and works for the most part. The current problem is that I cannot have a single VST parameter controlling one stack, I needed multiple patch mem which gives me lots of meaningless parameters, one per button. Here are some examples, I tried to clean up the controls but so far I was unsuccessful. The one that doesn't say "controllers cleanup" is my working initial one. The others are unsuccessful attempts. ATG.zip (140.91 KB) You can find the VST here. drive.google.com/open?id=0B0iCj7xEijuUflM2Ymp0QnJqQVo0WGtLUDB3MUZ1QV9IcDVRc3JXdTR0VXpvS05SWWVIdTQAs you can see I cannot automate these stacks from the VST I actually need a 32bit module for this project. 64bit would be good for the future.
|
|
Sacco
New Member
Posts: 17
Posts: 17
|
Post by Sacco on Dec 2, 2016 3:25:51 GMT 1
I'm dealing now with Panel Switches for a MIDI controller. As I press buttons there must be a MIDI out message, I did that by using a list selector and converting the voltage to MIDI CC Now, I could try some of the panel switches from KDL and works by using multiple patchmem modules, my main problem is to be able to enable automation on these panels. Using several patchmem modules doesn't work, I need one module (I guess listmem) to be able to do so but the problem is that I cannot fully implement the panel. So...I need a bit of your help if possible...how are these panel switches supposed to be used in SE?
|
|
Sacco
New Member
Posts: 17
Posts: 17
|
Post by Sacco on Sept 29, 2016 20:43:36 GMT 1
You can. Not hard at all using the example I posted, but an LFO is feeding voltage to the image construction.
|
|
Sacco
New Member
Posts: 17
Posts: 17
|
Post by Sacco on Sept 14, 2016 0:44:01 GMT 1
I usually use bitmap images controlled by voltage using a KDL volt to guifloat (gives you 60fps or more)
|
|
Sacco
New Member
Posts: 17
Posts: 17
|
Post by Sacco on Sept 14, 2016 0:34:54 GMT 1
Super slick.
|
|
Sacco
New Member
Posts: 17
Posts: 17
|
Post by Sacco on Sept 14, 2016 0:28:15 GMT 1
|
|
Sacco
New Member
Posts: 17
Posts: 17
|
Post by Sacco on Sept 13, 2016 23:32:02 GMT 1
oops, sorry. Fixed.
|
|
Sacco
New Member
Posts: 17
Posts: 17
|
Post by Sacco on Sept 13, 2016 3:51:02 GMT 1
After 10 years using the original releases (v.1.7 and 1.3 respectively) and finding them super useful in the studio for production I decided to give these two a facelift and an upgrade. OverDubber 2 now has a bigger and much refined animated skin and two new FXs inside the feedback loop such as a bit crusher to add more harmonics to the delay tail and a pitch shifter that makes successive delay repetitions to raise or lower in pitch. www.kvraudio.com/product/overdubber-2-by-klanglabswww.kvraudio.com/product/backman-by-klanglabsBackMan reverses the signal in sync with your host, i rearranges the reverse slices so the strong and weak beats remain unaltered in your song. These were created and updated in SE 1.0...the update went like a charm, is really a pleasure to work with v1 to me. Works quite well in Windows10, pretty much as back in the days. Hope you enjoy them as much as I do.
|
|
Sacco
New Member
Posts: 17
Posts: 17
|
Post by Sacco on Feb 9, 2014 15:17:39 GMT 1
I mean I added a couple things that makes the plugin easier to use/automate....like the "explode" button that makes the feedback to rise momentarily without having to dial the perfect value or the panic button when the resonance has gone crazy. Things like that. for example, P-deelay, I haven't seen a pattern based delay on any other plugin. I will update them all with new skins and newer SE eventually, but I need the time to do so.
|
|
Sacco
New Member
Posts: 17
Posts: 17
|
Post by Sacco on Feb 5, 2014 17:28:18 GMT 1
Check out in the graphics section for SE 1.1
|
|
Sacco
New Member
Posts: 17
Posts: 17
|
Post by Sacco on Feb 5, 2014 17:27:18 GMT 1
|
|
Sacco
New Member
Posts: 17
Posts: 17
|
Post by Sacco on Feb 5, 2014 17:25:38 GMT 1
Here's a default skin that makes SE elements (knobs, sliders, buttons) to look good, better than the default skin. Inside you can also find some other knob styles you can freely use for your stuff (just give some credit in the about box) default_.zip (946.78 KB) extra 1.zip (755.34 KB) extras 2.zip (126.77 KB)
|
|
Sacco
New Member
Posts: 17
Posts: 17
|
Post by Sacco on Feb 5, 2014 17:04:44 GMT 1
Hi, I like the tidea of having a grey background.
I have myself a nice default skin that is not so ugly that the one that comes with SE
I will post it now in the appropriate forum so you can give it a spin.
|
|
Sacco
New Member
Posts: 17
Posts: 17
|
Post by Sacco on Jan 30, 2014 20:49:42 GMT 1
Hi all my VST plugins are now available in KvR Brand: KlangLabs Commercial Products: StompBud * (Body sounds, Mixed claps / Soft claps / Hard claps / Flat claps / Fat claps / Chest hits / Pants hits / Feet hits / Finger Snaps ) (€30) Paypal -- Vokko * (Flexible realtime stereo Vocoder with wav and sf2 support for carriers) (€30) Paypal ---- Freeware (you must use the "My KvR" option and add to favorite first) BackMan (realtime audio reverse)* Daft Funk (X-Y FSU slicer and repeat)* Deelay (multiple delay bank) Glitch (MIDI triggered audio Glitcher)* Granola (granular synth) Granola 2 (granular synth, let's you travel on the waveform using the mouse)* MetroBus (metronome) Microgater (MIDI sequenced audio gater) Milli Vinylli (Old vinyl simulator)* Mr Green (X-Y based multi mode filter)* OverDubber (Feedback delay for Reggae/Dub/Triphop music with "explode" button)* P-Deelay (host sync'd pattern based delay)* R2 (R2D2 simulator, takes audio (voice) and pukes R2 noises)* StereoFaker (when you need to fake stereo out of mono) Synodeia (audio to MIDI) Synodeia 2 (audio to MIDI) WNM1 (FM FX workbench) WoW (wah wah) * = there's nothing like this in the market.
|
|
Sacco
New Member
Posts: 17
Posts: 17
|
Post by Sacco on Jan 30, 2014 20:41:14 GMT 1
Hi finally we have a forum after all these years.
|
|