Claus
New Member
Posts: 62
Posts: 62
|
Post by Claus on Apr 19, 2014 16:02:19 GMT 1
In SE 1.017 it was no problem to make an EQ with a 6/12 db setting and with some pretty straightforward logic, make all faders react to the 6/12 db settings button via the MIN/MAX pins on PatchMem Float. I know these pins has moved to the Automation Page - but why??? How is it possible without a (lot of) extra logic, to make the same in SE 1.1?
|
|
Claus
New Member
Posts: 62
Posts: 62
|
Post by Claus on Apr 27, 2014 11:38:37 GMT 1
To illustrate (using SE 1.017): Range at 12 db, faders set at ~6db: Range at 6 db, faders automatically adapts (by using min/max pins) and without a jump in level: When I loaded it in SE1.1, at first I thought "ok, reconnect some wires to get it to work, but I was actually shocked a bit to see that all the Min/Max wires went nowhere As I see it, it looks like a lot more modules are needed, just to make each fader (joystick) behave exactly like that in SE 1.1!?
|
|