bishka
New Member
Posts: 8
Posts: 8 
|
Post by bishka on Jul 25, 2014 11:39:56 GMT 1
Hope this is not a silly question but How do I make a Tri Colour LED? I don't really understand how the LEDs, Sliders etc work so I have been going round and round in circles and getting nowhere fast.  Regards Bishka |
|
|
|
Post by mindtraveller on Jul 25, 2014 23:01:33 GMT 1
When you insert the LED2 module into your project, unlock it and open its container window, you'll notice a 'Tinted Bitmap Image' Subcontrol. You can change the color of the LED by adjusting the value at the 'Hue'-pin. Values go from 0 to 1. 0 is red, about 1/3 is Green, 2/3 is Blue and 1 is red again. I hope that helps.
|
|
bishka
New Member
Posts: 8
Posts: 8
|
Post by bishka on Jul 26, 2014 7:08:21 GMT 1
Thanks for the quick reply.
During my fumblings I have managed to get that far. But, what I cant workout is how I adjust the LED Colour with a CV or some other controller.
For the project at hand I just need to switch between; white, green and red.
Regards Bishka
|
|
bishka
New Member
Posts: 8
Posts: 8
|
Post by bishka on Jul 26, 2014 14:56:58 GMT 1
I have finally got what I wanted, by modifying a Led2. Thanks again.
Regards Bishka
|
|
|
|
Post by mindtraveller on Jul 26, 2014 15:22:12 GMT 1
cool :-)
|
|
