dazz
New Member
Posts: 9
Noobing my way
Posts: 9
|
Post by dazz on Jul 11, 2019 5:29:10 GMT 1
hi ive been trying to find as much information as possible for a gate / compressor and im not having any luck i did find one JPG and assembled it and tweaked the values of the knobs but it just does not seem to work can any one help me with it  Attachments:COMP.se1 (44.76 KB)
RH-DSP.zip (451.13 KB)
|
|
dazz
New Member
Posts: 9
Noobing my way
Posts: 9
|
Post by dazz on Jul 15, 2019 13:51:31 GMT 1
please
|
|
|
|
Post by twoifbysea on Jul 16, 2019 5:13:24 GMT 1
I only had a few minutes to test your project but it looks like you’re working on a hard knee compressor. I would start by changing the low and high value ranges for your knobs to suit your desired results. You wouldn’t want to use the default 0-10 volts for your attack, release and ratio knobs, so you’ll need to do the math conversions for volts to ms.
|
|
dazz
New Member
Posts: 9
Noobing my way
Posts: 9
|
Post by dazz on Jul 16, 2019 8:16:35 GMT 1
thanks for taking the time the components are looking ok so then its just the settings im not sure what the ranges should be ? is there some where i find those conversions ...
|
|
|
|
Post by twoifbysea on Jul 16, 2019 14:28:05 GMT 1
|
|
dazz
New Member
Posts: 9
Noobing my way
Posts: 9
|
Post by dazz on Jul 17, 2019 3:36:11 GMT 1
thanks heaps ...
|
|
dazz
New Member
Posts: 9
Noobing my way
Posts: 9
|
Post by dazz on Jul 17, 2019 5:32:19 GMT 1
you dont know where i can download the examples from the wizoo book do you ?
|
|
|
|
Post by Mastrcode on Jul 29, 2019 11:34:22 GMT 1
|
|
