alienoiz
Synthedit regular
Posts: 148
Return Goku!
Posts: 148 
|
Post by alienoiz on Feb 6, 2014 11:41:29 GMT 1
easy for sure:
1 - what module do i set as an off on one one2many list module?
I have a tempo sync lfo connected to 2 one2many lists. This LFO already has an on/off switch but i want to have one list inactive for sometimes. The use of a second switch is not an option here just because i introduced this 2nd list feature after i created the GUI, wich means the space is almost none. I´m using at this moment a level adj as a dead end to this LFO channel. Is this correct, or will it cause any problems?
Thanks:
Duarte V.
|
|
|
|
Post by Rob on Feb 6, 2014 12:08:13 GMT 1
The lvl adj. as a dead end is correct.
|
|
setronic
Synthedit regular
Posts: 293
Posts: 293
|
Post by setronic on Feb 7, 2014 7:39:26 GMT 1
essential knowledge, then..because it puts its own
output at 0v? any other options? multiply by zero?
> no unterminated voltages
with the other way round, many to 1, i've been using
a fixed 0 value for the 'off' pin.
|
|
alienoiz
Synthedit regular
Posts: 148
Return Goku!
Posts: 148
|
Post by alienoiz on Feb 7, 2014 11:04:52 GMT 1
The lvl adj. as a dead end is correct. yes ... like a voltage blocker... when set to off the list sends to this module and nothing happens??!!!! Thanks, eheh, i miss understood your reply a bit lo0l...im kinda sleepy i didnt realized you ended with (.) and not with (?). Thanks Rob! |
|
alienoiz
Synthedit regular
Posts: 148
Return Goku!
Posts: 148
|
Post by alienoiz on Feb 7, 2014 11:07:33 GMT 1
essential knowledge, then..because it puts its own output at 0v? any other options? multiply by zero? > no unterminated voltages with the other way round, many to 1, i've been using a fixed 0 value for the 'off' pin. im using 0v in the lvl adj! i think i cannot use manyto1 cause the pins wont match... the lfo is going to feed things like pitch and pan!!!!  ? It looks like it is correct! : ))) |
|
|
|
Post by digitalresonance on Feb 17, 2014 23:10:38 GMT 1
What is the dead end for at the end of lfo channel?
|
|
alienoiz
Synthedit regular
Posts: 148
Return Goku!
Posts: 148
|
Post by alienoiz on Feb 18, 2014 4:05:21 GMT 1
What is the dead end for at the end of lfo channel? I used a tempo sync LFO to control several parameters in my synth, used a one2many module for 2 lists of parameters, and i needed an OFF option for my LFO in these lists. The "dead end" here is an option in the lists that blocks the LFO signal so that the signal cannot "leave"... like a closed door! This way i can use the same LFO with 2 different lists and set one or the other OFF while one or the other is sending the LFO signal. : ) Before these lists i added a switch to turn the LFO ON/OFF. |
|
|
|
Post by digitalresonance on Feb 18, 2014 12:48:00 GMT 1
Oh right.. I see. Thanks for explaining that. Good idea too  |
|
?
