Post by setronic on Mar 1, 2014 6:46:45 GMT 1
what is the correct way to mix CV signals going into a CV input,
without exceeding destination range, or hitting maximum level
too quickly? (> what happens with hardware modular? any hardware
synth?)
eg:
inputs to Cutoff, or Pitch CV in, or -particularly- Amplitude , etc.
from: Manual control/LFO/EG/keyfollow/velocity/modwheel/etc.
if these occur simultaneously, the level will be maxed out quickly.
i thought of dividing the total CV by the number of inputs, and
this works more or less, but there are level-stepping jumps when,
the EG for example drops to '0', the division value changes abruptly.
(calibration of each source amount has to take place before entering
this stage)
i suppose this is the art of making a synth's response, and everyone
cooks their own. i was told that cutoff should have inputs simply
summed into it, but you can get a different 'travel' from the controls
with eg: a level adjust 'normalising'
without exceeding destination range, or hitting maximum level
too quickly? (> what happens with hardware modular? any hardware
synth?)
eg:
inputs to Cutoff, or Pitch CV in, or -particularly- Amplitude , etc.
from: Manual control/LFO/EG/keyfollow/velocity/modwheel/etc.
if these occur simultaneously, the level will be maxed out quickly.
i thought of dividing the total CV by the number of inputs, and
this works more or less, but there are level-stepping jumps when,
the EG for example drops to '0', the division value changes abruptly.
(calibration of each source amount has to take place before entering
this stage)
i suppose this is the art of making a synth's response, and everyone
cooks their own. i was told that cutoff should have inputs simply
summed into it, but you can get a different 'travel' from the controls
with eg: a level adjust 'normalising'