Post by setronic on Feb 6, 2014 6:45:58 GMT 1
useful/pointless piece of info:
max screen height and width in SE 1.017 exist:
height limit is reached by a prefab with (384 + 72 +4)
> 460pins showing here
so a mega 'boolsplit' of 16x12 matrix will not show all
the pins, for example, if you also want a 3rd left side
pin. -> ironically, after making the prefab, the only way
to delete pins is from the inside of the container, hehe.
(> so you'd have to split such a stage into twin containers,
side by side)
found also a width limit, which doesn't matter so
much (hard to define without uploading a big prefab)
wonder if/how this changes with 1.1 onwards.
-------------------------------------------------------
Q: what are issues for JeffM, with max height/width, and
redraw/performance of project within SE? #of cables
(per page/container?) -ie: what is happening 'under the
bonnet'
> cable-bundling has been mentioned as a requested feature
for 1.2, to positive response from JeffM: this would allow
some benefit for redraw (and project viewing!) presumably:
like 'ribbon' cables in hardware devices - ?maybe a ribbon
can have 'properties', and some sort of unique identity>
ribbon/cable bundle/loom could be saved/copy+pasted/imported?
(if useful?)
max screen height and width in SE 1.017 exist:
height limit is reached by a prefab with (384 + 72 +4)
> 460pins showing here
so a mega 'boolsplit' of 16x12 matrix will not show all
the pins, for example, if you also want a 3rd left side
pin. -> ironically, after making the prefab, the only way
to delete pins is from the inside of the container, hehe.
(> so you'd have to split such a stage into twin containers,
side by side)
found also a width limit, which doesn't matter so
much (hard to define without uploading a big prefab)
wonder if/how this changes with 1.1 onwards.
-------------------------------------------------------
Q: what are issues for JeffM, with max height/width, and
redraw/performance of project within SE? #of cables
(per page/container?) -ie: what is happening 'under the
bonnet'
> cable-bundling has been mentioned as a requested feature
for 1.2, to positive response from JeffM: this would allow
some benefit for redraw (and project viewing!) presumably:
like 'ribbon' cables in hardware devices - ?maybe a ribbon
can have 'properties', and some sort of unique identity>
ribbon/cable bundle/loom could be saved/copy+pasted/imported?
(if useful?)